Pull the yarn to the left, https://www.paintingdiamond.cz/video/wel/video-is-slots-and-casino-legit.html sliding it into the second slot and behind the second zigzag. It has been weaved through the tension arm and https://www.paintingdiamond.cz/video/wel/video-skill-and-slots-login.html held by both the second and final zigzag. Pull the thread into the second thread guide, a small slit of metallic just above the needle. Secure the thread into the second thread guide by pulling it into the slit from left to proper. Secure the thread in the first thread information's slit by pulling it into the slit from proper to left.
Open the bobbin holder below the needle plate and remove the bobbin case, https://www.diamondpaintingaction.com/video/wel/video-real-cash-slots-online.html the metal object inside, by pulling up on the lever on the front of the case. The presser foot ought to increase up whenever you flip this lever. Lower the presser foot earlier than sewing. Raise the presser foot and hold a size of thread from the needle loosely. Once you've opened the shuttle cover, rotate the hand https://www.cheapestdiamondpainting.com/video/wel/video-game-of-thrones-slots.html wheel toward you to lift the needle out of the strategy to its highest position.
Pull the tail up and https://www.diamondpaintingaction.com/video/wel/video-penn-slots.html out with your fingers. Open the bobbin compartment.
Hold the handle of the bobbin shuttle open and place the bobbin back into its place under the needle. Pull the thread across the back of the lever, http://Kepenk%C2%A0trsfcdhf.hfhjf.hdasgsdfhdshshfsh@forum.annecy-Outdoor.com/ from left to proper. Be sure the thread is secured between the disks by pulling it slowly and moving the tension wheel, the wheel right next to the tension disks, https://www.paintingdiamond.cz/video/wel/video-games-slots.html to a better quantity. For the fourth slot, pull the yarn left and behind the fourth zigzag.
Push the thread by means of the thread guide's eye and pull it towards you. There's a small slit in the take-up lever with a watch at the top of it.